Coolsky provide a range of pipework and fitting for residential and commercial applications.
| Product Code |
Description |
Picture / Schematic |
CSR00065
CSR00066
CSR00067 |
DN16 Pre-Insulated Single Stainless Steel Pipe
AISI316 Stainless Steel, K Flex EPDM Solar Insulation, UV resistant to ISO 4892/2 Method A, Polyethylene Outer Cover, Fire Rating DIN 4102-B2, Free From CFC, HCFC or Formaldehyde, 4 Core Heavy Duty Sensor Cable. (Requires fixing kit CSR00069 for standard installation – additional fittings may also be require for other configurations)
20 Meters Boxed
15 Meters Boxed
10 Meters Boxed |
|
CSR00071
CSR00072
CSR00073 |
DN20 Pre-Insulated Dual Stainless Steel Pipe with Sensor Cable
AISI316 Stainless Steel, K Flex EPDM Solar Insulation, UV resistant to ISO 4892/2 Method A, Polyethylene Outer Cover, Fire Rating DIN 4102-B2, Free From CFC, HCFC or Formaldehyde, 4 Core Heavy Duty Sensor Cable. (Requires fixing kit CSR00070 for standard installation – additional fittings may also be require for other configurations)
20 Meters Boxed
15 Meters Boxed
10 Meters Boxed |
|
CSR00069
|
Standard Hyrdaulic Fixing Component Kit : DN16 Pipe with ¾” Flat Face Fittings
Kit includes all hydraulic fittings and components required to fit DN16 Flexible Stainless Steel Pipe for Standard Solar System Layout. Includes 8 x Female Nuts, Washer/Gasket, 2 x 22mm to ¾” RA Fittings (to Collector) and 2 x ¾” to 22mm Spigot (to Cylinder)
(Note : Does not include Flexible Stainless Steel Pipe – See Next Section for Pipe) |
|
CSR00052
|
Through Roof (1st Fix Kit) DN16 : 2 x 1m Insulated Flexi Pipes
2 of m Length of DN16 Pre-Insulated Flexible Stainless Steel Pipe with 1 x Male ¾” Fitting and 1 x Female ¾” Fitting, both for ¾” Flat Face gasket seals.
(Note : To Connect to the Manifold 2 of ¾” to 22m Elbow Fittings are required –supplied with Standard Hydraulic Fittings Kit CSR00069 or part number CSR00077) |
|
CSR00070 |
Standard Hyrdaulic Fixing Component Kit : DN20 Pipe with 1” Flat Face Fittings
Kit includes all hydraulic fittings and components to fit DN16 Flexible Stainless Steel Pipe to a Standard Solar System Layout. Includes 8 x Female Nuts, Washer and Gasket, 2 x 22mm to ¾” RA Fittings (Collector) and 6 x ¾” to 22mm Spigot (Cylinder)
(Note : Does not include Flexible Stainless Steel Pipe – See Next Section for Pipe)
|
|
CSR00057 |
Through Roof (1st Fix Kit) DN20 : 2 x 1m Insulated Flexi Pipes
2 of m Length of DN20 Pre-Insulated Flexible Stainless Steel Pipe with 1 x Male ¾” Fitting and 1 x Female ¾” Fitting, both for ¾” Flat Face gasket seals.
(Note : To Connect to the Manifold 2 of 1” to 22m Elbow Fittings are required –supplied with Standard Hydraulic Fittings Kit CSR00070 or part number CSR00075) |
|
CSR00078
|
East West Connection Add-On Kit : DN16 Pipe with ¾” Flat Face Fittings
When combined with product CSR00069 gives fittings required for a standard East / West System Installation. This kit includes additional High Temperature PT1000 Sensor, 2 x ¾” Flat Face Equal Tees and 10 x Female Nuts, Washers & Gaskets |
|
CSR00076 |
East West Connection Add-On Kit : DN20 Pipe with 1” Flat Face Fittings
When combined with product CSR00070 gives fittings required for a standard East / West System Installation. This kit includes additional High Temperature PT1000 Sensor, 2 x 1” Flat Face Equal Tees and 10 x Female Nuts, Washers & Gaskets |
|
CSR00088 |
East West Connection Add-On Kit : 22mm Compression Fittings
Kit provides extra fitting required for a standard East / West System Installation. This kit includes additional High Temperature PT1000 Sensor, 2 x 22mm Compression Equal Tees |
|